Видео

pretty great can break free 35lbs or 150 lbs manually and then let it run the bolts off which only takes an extra second or two

Bringing my derelict 95 Cavalier back to life for its upcoming 30th birthday spent most of the last month painting the floorpans with chassis saver and cleaning all the hornets nests out of the body. The gas tank was a massive nest so I had to replace it just now getting new interior in from a 97 model. Does Duplicolor work on carpet as well?

Metabo Hpt >

This might be a stupid question but of the stud is broken 3/8 in can i still weld without worrying about threads? If the build up from the weld touches the thread does it mess it up?

Thanks for the information. May I ask at what temperature you set your heat gun for the heat shrink tubing?

For the ratcheting crimpers and connectors? Why do you recommend non insulated over insulated? I would think you'd get more use with insulated. Not all connections and be used with non insulated, but can be used with insulated. The insulated heatshrink connectors with the ratcheting crimpers are great. I guess you can use heatshrink tubing with non insulated if you need to, i just find the insulated connectors better, especially the heatshrink ones where the glue melts and seals them. I do have heatshrink tubing with the sealing glue, but the outside is clear so you can see everything, but i never use it because i just use the heatshrink connectors. Also, i crimp on the seam. Seems to be a better crimp. I always thought they were made to crimp on the seam. Edit: ah. I asked too soon. You did answer my question in the vid lol. I get that you can see it better, but ive never had a problem w the heatshrink connectors. They're transparent so i can see the crimp. I dont like the cheaper non heatshrink ones. You cant see the crimp, and i always felt they never gave as good as a crimp, and they arent water tight

Imagine how great your country could be if it went metric.

If it's not coming off it's a good crimp but I would do exactly what you did with the split seam do it on the back

Couldn’t agree more with literally everything you said here! I work for a high end European automaker and when it comes to wiring repairs, the only thing they allow you to use is their approved solder heat shrink ReyChem things. They use them from the factory and they’re awesome! However I have never EVER had any luck with getting a good joint out of them. I dunno how the factory does it, but no matter what, I couldn’t. They probably have a few million dollar machines that do it. Over the years I tried at least ten different heat guns and untold number of heat settings, distances, time, adapters, even the very pricey factory gun. No matter what I did I could never get a connection I was comfortable with. Same goes for all my coworkers too. So since I know how to solder and I think I’m pretty good at it, I took every single one of those solder shrink terminals and through them in the trash. I then soldered the old school way with dual wall adhesive lined heat shrink. Never ever had an issue with any repairs done like that! PS. At least in my world, there was two different types of that cloth tape. There was a tighter weave for wiring exposed to the elements, and a looser less expensive weave meant only to be used in the interior. Obviously you can use the tighter weave exterior tape in the interior but the looser weave interior tape will not last long when used on the exterior. I dunno how Amazon or other places sell it, but best to stick with just the one tighter weave and never worry about. The brand my company uses is Tesa. Damn good harness tape!

Those styles of crimping tools are a waste of money. I've literally purchased 2 hydraulic crimping sets only used them 1 to 2 times and they both malfunctioned just from sitting in their cases in climate controlled storage.

I can’t even afford a $300 plus battery for my weedeater. You’re going to pay at least minimum $1200 and more to replace the batteries it’s a throwaway toy.

La profondità di comprensione dimostrata dai partecipanti è umiliante. È come trovarsi al cospetto di giganti intellettuali.✨

Just got one for $999 on clearance at homedepot

Thanks for sharing

I agree with your terminology regarding the size of the saw. I did the same thing when I picked out my 14" saw. I wanted little big saw; which is why I selected the 40v Greenworks instead of the EGO; which, in my opinion; is a big little one. I own both brands and really like both of them; for their targeted use. As far as this Ridgid goes; I think it looks/is kinda ridiculous.

Ill stick with my Knipex thanks.

Hi , great job, will this scratch off,? I have two jack russel dogs😅

How does this compare to an eco + 18" Misting? I'm trying to decide to stick with milwaukee or invest into the eco for that one tool. Utah summer getting warm

I LOVE flywheels! they fly!.. smFh .. and.. DCF860!

Love mine

Kobalt 24v right angle owner. Love the tool, but Rigid has just dethroned the champ. Glad the segement has competiton now!

20 mi range* 28 mph Max

Clown

You didn’t even have your depth of drive correct the whole time 😂 at the end you can see you had to set it all the way down in order to toe nail which should have been set all the way down in the first place for framing

That’s not 16 center 😂 you’re breaking right next to the stud. You hook your tape 15 1/4 for 16 centers so your sheets break in the center of the studs

How much does it weigh?!

Pretty suprised that the ridgid one is more powerful. Rated for 4k cfm on high.

The Dewalt design team have no idea. This gun had the opportunity to have the magazine set directly under the body instead of being angled, will look better. No need for a 21 degree magazine, do your homework and what type of nail sells the most, just sell one type of nail nine degrees is not gonna change the framing industry, the whole idea should be you can use any manufacturers nails that are readily available. Provide a more aggressive tip, how many reviews can the design team completely ignore… obviously the design team don’t watch videos or listen to their customers. Dewalt have had all these years to have a versatile belt and rafter hook, but only come up with this shit rafter hook …why. The flywheel tech has room to improve but obviously the R&D team didn’t get enough funds to be more creative. Get rid of the bowed handle, nobody else has one…. Tidy up your magazine and just like the Paslode provide a metal strip on the bottom so you push timber without worrying about cracking the magazine. Just like the charged battery nailers which have very limited opportunity to get lighter or better, Dewalts nailer can soon be obsolete due to the manufacturer not investing being creative and sufficient money. That will leave Paslode laughing all the way to the bank.

I am curious on the weight compared to the Milwaukee? I use all Dewalt tools except nail guns I use Milwaukee. I bought the 18 gauge Dewalt used it for 1 day and took it back and got the Milwaukee.

It’s ok but they could do better

This fool repeats himself for an entire 2 mins and 19 seconds. Literally skip until 2:19 to get to anything remotely valuable. We don’t need a monologue next time.

I like DeWalt but I will never buy that flywheel garbage

I hated the video and I'm leaving a thumbs down! Nah I'm kidding. I own the same grinder (model - PBLAG01) and it's a beast. It's a typical 4½" battery grinder, sucks up those batteries like shot glasses, but mighty powerful. Especially for a Ryobi, this one has some ass behind it and gets the job done (long as you have the sacrificial 18v). They're really closing the distance between them and the upper level of power tools like Milwaukee's offerings.

You talk too much, dude. Video's twice as long as it should be.

Pads don’t last long at all if you’re working it even slightly hard on an edge or corner. For the price and the special shaped sand paper you have to buy. 4/10 from me.

Now the obvious question is how does it compare to the TTI rivals? You know the non flywheel type! I think it’s time for a showdown! Please?!

I was at tool show the dewalt blew the Milwaukee away

Say what you want about Ryobi but I think it’s got this one beat in a bad way..😂

I have had several nail guns that will shoot most nails great. but one or two low cost nails would jam.

Wow juuuuuuuuunk

Not sure what you need angle for

had to wait almost 2 months for mine but this thing is nice

So false advertisement for 3200 psi👍. Great for my uses at home and wash my semi-truck at the truckstop ❤❤. Great review

So interestingly the manual says finish mode is for thin metal and self tap mode is for thicker metal. Anyone have luck with finish mode on non metal? I thought it was to prevent stripping out screws.

Question-- The ½" model (DCF512) that just arrived sounds like a machine gun running at no-load. Is that normal, or should it go back to Amazon?? Was I just mislead by how smoothly the DFC94 runs??

Man the only Dewalt framing nailer ive ever seen work properly is mine. 😂 every single other one is trash.

How thick is the steel on your table if you don't mind? And where did you buy it?

Still junk, all the cordless nailers are junk except the roofing gun, is great for installing Anderson windows and quick roof jobs.

JUNK!!!! Good video anyway, Thanks!!!!!

Well, that certainly didn’t go as planned. Glad you got it for free anyways.